Kar-Gor Inc.
ITS Express Interconnect 1000
Interconnect 1000 delivers an unmatched combination of robust performance and affordability in the crowded wireless technology space.
The Interconnect 1000 Series wireless Bridge/Access Point, based on IEEE 802.11 band IEEE 802.11g Technology, delivers bridging and access point features enabling cost effective access Ethernet-Bridging and access to traffic cabinets within a five mile span. Up to 18 Miles Point to Point to Point with proper elevation and antenna. Maximized for Video multi cast networks. Vlans are trunked for pass thru without stripping out tags. Optimized for Traffic cabinet application, as well as point to point bridging. Bridging and ap access can be simultaneous, if desired. IP68 approved housing is fit for ruggedized outdoor environments.
In addition, supports IEEE 802.1x-compliant and RADIUS (Remote Authentication Dial-In User Services), the most up-to-date wireless security solution for applications in outdoor public places. Also, the cabinet interconnect 1000 provides standard WDS (Wireless Distribution System) bridge functionality joining LAN segments that may be geographically separated (e.g. cabinet to cabinet connections or cabinet to tower connections ) Up to 6 WDS bridge links work in Bridge/AP mode allowing simultaneous bridging and AP access, or straight point to point bridging, thus enabling LAN segments to be flexibly connected to mirror any network topology which a traditional wired network can achieve. The Antenna Alignment Utility provides the at-a-glance way to easily assist the antenna deployment through the friendly Windows-based user interface.
ITS-8040
The most advanced ITS Industrial 8-port Gigabit Managed Ethernet Switch on the market featuring 4x10/100/1000T and 4x Gigabit Combo port designed for the most demanding IP Video Network.
The most advanced ITS Industrial 8-port Gigabit Managed Ethernet Switch on the market featuring 4x10/100/1000T and 4x Gigabit Combo port designed for the most demanding IP Video Network.
•
8 port 10/100/1000TX copper ports
•
Optical monitoring = instant status of voltage
•
Layer 2+ managed hardened IGMP video switch
•
4 10/100/1000 dual speed hybrid fiber SFP combo ports
•
Fast recovery time < 20ms over 250 units of connections
•
Designed for heavy multi-cast high heat traffic demands
•
Back plane (switching fabric) 18 GBPS, 8K MAC address
•
Multiple configurations: web browser, CLI, telnet
•
Event notification: syslog, email, SNMP & relay output
•
Full layer 2+ management, 802.1x authentication
•
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
•
Supports IGMP query & snooping version 1, 2 & 3
•
Dual redundant PS guarantees non-stop operation
ITS-8012
Industrial 12-port Gigabit Managed Ethernet Switch with 4x10/100/1000T and 8x Gigabit Combo port designed forthe most versital hardened ITS Video Environments
•
4 port 10/100/1000TX copper ports
•
Optical monitoring = instant status of voltage
•
Layer 2+ managed hardened IGMP video switch
•
8 10/100/1000 dual speed hybrid fiber SFP combo ports
•
Fast recovery time < 15ms over 250 units of connections
•
Designed for heavy multi-cast high heat traffic demands
•
Back plane (switching fabric) 24 GBPS, 8K MAC address
•
Multiple configurations: web browser, CLI, telnet
•
Event notification: syslog, email, SNMP & relay output
•
Full layer 2+ management, 802.1x authentication
•
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
•
Supports IGMP query & snooping version 1, 2 & 3
•
Dual redundant PS guarantees non-stop operation
SFP Transceiver
The SFP transceiver is high performance, cost effective module supporting dual data-rate of1.25Gbps/1.0625 Gbps and from 10km to 120km transmission distance with SMF.
The ITS Express SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 120km transmission distance with SMF. The transceiverconsists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver. The standard serial ID information compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. The SFP transceivers are compatible with RoHS.
•
1310nm FP laser and PIN photo
•
Operating temperature -20 to +100C
•
10K-20K-40K-60K-80LK-120K transmission with SMF
•
Dual data-rate of 1.25Gbps/1.0625Gbps operation
•
Available with optical monitoring (-om series)
•
Standard serial ID compatable with SFP MSA
•
SFP MSA package with duplex LC connector
•
Spring-latch for high density applications
•
Avery low EMI and excellent ESD protection
•
+3.3V single power supply
•
Available in both single mode and multi-mode versions
ITS-8020+
Advanced cost effective ITS Hardened Layer 2 Industrial 10-port Managed Ethernet switch designed for harsh Multi-Cast environments. Versatile & affordable hardened Layer 2 switch that exceeds the competition class specfifction with rich features such IGMP V1,V2, V3 and real time critical monitoring.
Advanced cost effective ITS Hardened Layer 2 Industrial 10-port Managed Ethernet switch designed for harsh Multi-Cast environments. Versatile & affordable hardened Layer 2 switch that exceeds the competition class specfifction with rich features such IGMP V1,V2, V3 and real time critical monitoring.
•
Optical Monitoring With Mapping Capabilities
•
Layer 2+ Managed Hardened IGMP Video Switch
•
Email notifications for Fiber Outages, Port down, ETC.
•
Multiple Configurations: Web Browser, Telnet, and CLI
•
7 Port 10/100 TX Copper Ports with 7.4 GBPS Back-Plane
•
Event Notification: Email SMTP, Syslog, SNMP & Relay Output
•
Fast ITS Ring Recovery Time 10ms over 250 units of connections
•
Easy to Configure, Web Interface designed by ITS users
•
Designed For Heavy Multi-Cast in Harsh environments
•
Full layer 2+ management, 802.1x authentication
•
Mode Fiber and BX Single Strand Fiber too!
•
Supports IGMP query & snooping version 1, 2 & 3
•
S-Flow network monitoring technology
ITS-8024
Advanced cost effective ITS Hardened Layer two 24-port Managed Ethernet switch designed for harsh Multi-Cast environments. Versatile & affordable hardened Layer 2 switch that exceeds the competition class specfifction with rich features such IGMP V1,V2, V3 and real time critical monitoring.
•
4 port 10/100/1000TX copper ports
•
Optical monitoring = instant status of voltage
•
Layer 2+ managed hardened IGMP video switch
•
8x 100/1000 SFP Ports Plus 16x Combo 100/1000 SFP/1000TX RJ45’s
•
8x 100 or 1000 Dual Speed Hybrid Fiber SFP Combo Ports
•
Designed for heavy multi-cast high heat traffic demands
•
56 GBPS Backplane
•
Multiple configurations: web browser, CLI, telnet
•
Event notification: syslog, email, SNMP & relay output
•
Full layer 2+ management, 802.1x authentication
•
QoS port-based STP/RSTP/MSTP (IEEE 802.1D/w/s)
•
Supports IGMP query & snooping version 1, 2 & 3
•
Dual redundant PS guarantees non-stop operation
Kar-Gor Inc., 3540 Brooks Ave. N.E., Bldg. 2, Salem, OR 97302 Phone: (503) 315-9899 Fax: (503) 315-9913 - ©2012 Kar-Gor Inc.-All Rigths Reserved
